You are here: Home > Support Center > Custom Upholstery
Custom Upholstery

Please be aware that custom made upholstery is non-returnable, except in a case of a warranty issue.

Custom Upholstery - Measurements and Specifications
Section 1
Please provide
Your Contact Information:*
Your Email:*
Your Phone Number:*
W/C Manufacturer and Model:*
Quantity:*
Product Code of standard Upholstery, if similar:
Any Special Instructions:
Material*
Color#: (See Color Chart)  
Embossing*
Invacare Pattern (new style)
Invacare Pattern (old style)
E&J Pattern
Flat, No Embossing Pattern
Padding
1/2" Foam
3/4" Foam
Reinforcement
2" Webbing Straps (inside upholstery)
Double Liner (inside upholstery) - We recommend double liners on upholstery 22" and wider.
Front Cap - for Seats only (Prevents wear and tear to the front edge of the seat)
Top Cap - for Backs only (Prevents wear and tear to the top edge of the back)
Leather Cover on tubes - for Lt.Wt.Backs only
Additions
Pocket, Full Width - for Backs only
Holes*
Punched - Round
Punched - Slotted
Unpunched - No Holes
Number of Holes on each side:
Section 1-A
Seat Specs
(in inches)
Overall Seat Width (S1):
Overall Seat Depth (S2):

Please measure hole spacings from front to back.
Distance from Front Edge to Ctr of 1st Hole (SF-1):

Measure distances between center to center of each screw, depending on how many holes on each side.
Distance from 1st - 2nd Ctr Hole (S1-2):
Distance from 2nd - 3rd Ctr Hole (S2-3):
Distance from 3rd - 4th Ctr Hole (S3-4):
Distance from 4th - 5th Ctr Hole (S4-5):
Distance from 5th - 6th Ctr Hole (S5-6):

Distance from Ctr of Last Hole to Rear Seat Edge (SL-R):
Section 1-B
Back Specs
(in inches)
Overall Bottom Width (B1):
Overall Height (B2):
Overall Top Width (B3):

Please measure hole spacings from bottom to top.
Distance from Bottom Edge to Ctr of 1st Hole (BB-1):

Measure distances between center to center of each screw, depending on how many holes on each side.
Distance from 1st - 2nd Ctr Hole (B1-2):
Distance from 2nd - 3rd Ctr Hole (B2-3):
Distance from 3rd - 4th Ctr Hole (B3-4):
Distance from 4th - 5th Ctr Hole (B4-5):
Distance from 5th - 6th Ctr Hole (B5-6):

Distance from Ctr of Last Hole to Top Edge (SL-R):
Section 1-C
Lt.Wt.Back Specs
(in inches)
Overall Bottom Width (LW1):
Overall Height (LW2):
Overall Top Width (LW3):
Distance from Bottom Edge to Ctr of Bottom Hole (LW4):
Distance from Bottom Edge to Bottom of Sleeve (LW5):
Overall Sleeve Length (LW6):
Overall Sleeve Length (LW6):
Distance from Ctr of Top Hole to Top Edge (LW7):
Please enter the following code into the box provided: