|
Tilt-a-Rack®
Easy to install, easy to use, inexpensive.
Finally an easy way to haul your scooter!
|
|
|
The
Tilt-A-Rack Scooter and Wheelchair Carrier makes
transporting motorized wheelchairs and scooters
effortless. A revolutionary design and superior
quality allows you the freedom to go anywhere you want,
safely and easily. Tilt-A-Rack Carriers easily
attach to your 2" Class III or Class II hitch (may
require height adaptor, see 'Helpful Hints' below), and do
not have to be connected to you car battery or wired to
the vehicle in any way. Simply tilt, load, and lock
and our scooter or wheelchair goes anywhere you go!
|
|
No
More:
-
Cramped
trunk space
-
Dealing
with dangerous ramps
-
Disassembly
of chair
-
Cramped
garage space - tilts up when not in use
-
Licensing
-
Extra
lights
-
Failing
electrical components
-
Problems
with non-handicap vehicles
|
|
|
|
Step
1 |
Step
2 |
Step
3 |
Step
4 |
|
|
|
|
|
|
Release
latches,
pull
out deck extender and tilt carrier down. |
Drive
scooter up
onto
carrier. |
Carrier
automatically levels. |
Push
in Deck Extender
and
reset latches.
Tie
down scooter and
you're
ready to go! |
The
tilt feature eliminates the need for ramps. With the
flip of a latch, the rack tilts easily toward the passenger
side. The deck
extender pulls out from underneath the scooter, reducing the
angle of incline. It also reaches the curb for loading
and unloading. This feature is especially helpful when
a handicap curb ramp is not available.
All
of the Tilt-A-Rack models feature a special leveling bolt to
compensate for hitches that might not be absolutely
level. There is a hinging device located just behind
the hitch, which has three positions. The first position
keeps the rack locked in the horizontal position. The
second position allows the loaded Scooter Carrier to lift
and float over dips and curbs. The third position
allows the empty rack to be folded into a vertical position
for storage.
|
ORDERING
INFORMATION
Rack
prices include FREE shipping
|
|
Model
# 500ARV Scooter Rack
|
$749.00 |
 |
|
Model
# 350ARV Scooter Rack |
$649.00 |
|
|
Model
# 350ARV Mini Scooter Rack |
$579.00 |
|
ACCESSORIES
|
|
|
|
Heavy-Duty
Scooter Cover |
$78.00 |
|
|
Nylon
Deck Cover (Reduces backsplash from tires) |
$35.00 |
|
|
Power
Tye (Tie-Down, set of 2) |
$20.00 |
|
|
Silent
Hitch Pin (Reduces rattling) |
$27.00 |
|
|
Class
III Height Adjuster Hitch Bar (Required if your
hitch is not 8" - 12" off the ground) |
$100.00 |
|
|
Class
II Height Adjuster Hitch Bar (Required if your
hitch is not 8" - 12" off the ground) |
$100.00 |
|
|
Class
III Hitch Bar Adaptor (Required if your hitch is
not 2" in diameter) |
$100.00 |
|
|
Class
II Hitch Bar Adaptor (Required if your hitch is
not 2" in diameter) |
$100.00 |
|
|
BEST
VALUE!
Option Package 1:
Includes Scooter Cover, Deck Cover, Silent Hitch
Pin, Power Tye |
$139.00 |
|
|
BEST
VALUE!
Option Package 2:
Includes Height Bar Adaptor (specify Class II or
III), Scooter Cover, Deck Cover, Silent Hitch Pin,
Power Tye |
$249.00 |
|
|
| Model
#500ARV
|
Model
#350ARV |
Model
#350ARV Mini |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Helpful
Hints for Hitch and Height Requirements All
Tilt-a-Rack models require a 2" Class III or Class II
hitch.
Hitches under 2" diameter may be adapted with
Hitch Bar Adaptor. |
| Hitch Type |
Approx.
Height of Hitch
from
the ground |
Additional
Hardware Required |
| 2"
Class III |
8" -
12" from the ground |
No
additional hardware is required |
| 2"
Class III |
Less than
8" from the ground |
Class III
Height Adjuster Hitch Bar |
| 2"
Class III |
More than
12" from the ground |
Class III
Height Adjuster Hitch Bar |
| Class III
(under 2" diameter) |
N/A |
Class III
Hitch Bar Adaptor |
| Class II
(under 2 diameter") |
N/A |
Class II
Hitch Bar Adaptor |
|
|
